Components and available options
The cells have large reflective signs on all sides indicating the cell and the direction of entry. And also a red and white stripe around it for better visibility of the camera in an accident.
SAFETY AND REFLECTIVE DIRECTION SIGNS
The chambers are equipped with guides for forklifts, a frame, and eye bolts for lifting mechanisms. A protective arc is installed around the case to minimize damage during transportation. Special lifting guides or hardware required to lower the camera down the barrel are available upon request.
LOADING AND TRANSPORTATION
The chamber is equipped with an inward opening escape hatch, which is equipped with an 18mm thick polycarbonate viewing window. An emergency hatch is necessary to provide an emergency exit in case the main entrance is blocked. The emergency hatch is equipped with locks.
A first aid kit sufficient to assist all workers is mounted on the cell wall. An additional set can be wall mounted inside upon request.
Powder fire extinguishers with a capacity of 9 kg are mounted and secured inside the airlock vestibule. Additional fire extinguishers are available upon request.
The restroom, hidden behind an opaque partition curtain, consists of a portable dry closet with a 19-liter water container.
Food rations are collected at the rate of 2000 kcal of food and 2 liters of water per person per day in individual packages. Food and water are stored under the seats and have a shelf life of 6 years.
The air conditioning system, powered by 24 V DC with dehumidification control, inverter type with remote control, has low current consumption. *The amount of heat generated by the human body, ambient temperature and CO2 scrubber over a long period of time creates a very harmful environment for the health of those in the chamber, therefore air conditioning is mandatory.
COOLING AND DRYING SYSTEM
Six LED lights are placed inside the chamber. RED and BLUE LED lights are placed on the outside of the camera body for identification and detection. The lighting is connected to a switching module of lighting equipment and an emergency kit with manual control, bypassing the automation.
The outside of the camera is yellow or white (at the customer’s discretion). The inside of the chamber is white. The outside of the chamber is coated in accordance with high wear resistance requirements using mastic coatings. The internal coating meets occupational safety and health requirements and is suitable for domestic use.
PAINTING OF RESCUE CHAMBERS
Automatic backup power supply consisting of lead-acid, fiber shockproof batteries connected through a charging module, providing power to operate the air conditioner, CO2 scrubber, lighting system, atmospheric monitoring (gas detection) and communication system (on request) for a stated period of time.
Transformer: All our cameras have a standard built-in step-down transformer operating from 220/110V/50Hz, but with the ability to be manufactured according to customer requirements. All camera systems operate on direct current.
Storage spaces are located under the seats as well as on overhead shelves. The seats are made of high quality padding and wear-resistant materials.
To make it easier to move, you can add an additional bag with wheels and towing device. The wheels are made of hard, high-strength rubber (not filled with air).
Optionally, the entrance section is separated from the main room by a second steel door or a heavy plastic curtain to minimize the access of harmful substances into the chamber. This section, together with the minimum excess pressure generated by the air flow into the chamber, allows you to avoid the ingress of harmful substances during work.
TAMBURAL LOCK IN THE CHAMBERS